AAP Elite S series Bedienungsanleitung

1 Operating Guide

10 gle “Panic” button or by the simultaneous operation of two buttons. The Fire and Medical alarms are generated by pressing two buttons simultane-ous

11 special function, if the <ENTER> button is pressed when a zone is un-sealed it will provide a two digit numeric display for all unsealed zone

12 DISABLE CHIME ZONES Any detector on your ELITE S can be programmed to trigger an output or the buzzer at your keypad when movement is detected. Th

13 REMOTE COMMAND CONTROL OPERATION HOW REMOTE COMMAND CONTROL WORKS Another powerful feature available from your alarm is Command Control. This fea

14 use the "*" key to toggle the option on & off or Arm and Disarm, e.g. in our example above, code “2045” accesses Area "A" a

15 REMOTELY ACKNOWLEDGING AN ALARM The Alarm panel can be programmed to report alarms directly to the owner via a nominated landline or mobile teleph

16 PROGRAMMING YOUR ALARM GETTING INTO PROGRAM MODE There are 2 levels of program mode, CLIENT mode and INSTALLER mode. Normally the installer will

17 the keypad. Entering a new code where a code already exists will delete the old code and the new code will be displayed at the keypad. The panel w

18 PROGRAMMING THE TIME & DATE The alarm system has an internal clock that may be used to automatically Arm or Disarm the alarm, turn Outputs On

19 To change the DTMF Output Control code press; <PROGRAM> <175> <ENTER> <12> <ENTER> <####> <ENTER> #### =

2

20 To Learn a new Access Tag User press; <PROGRAM> <21> <ENTER> <1-100> <ENTER> 1-100 is User number 1-100. When in lear

21 HIDING USER CODES WHEN IN INSTALLER MODE If the User is authorised to do so they may prevent the User codes from being displayed when in Installer

22 USER FUNCTIONS STARTING WALKTEST MODE While in CLIENT mode a User with the proper authority can start walk-test mode. This special mode latches t

23 FORCE A TEST CALL If the alarm is monitored by a monitoring company it may be necessary to force a test call to ensure that everything is still fu

24 MEMORY DISPLAY MODE VIEW MEMORY MODE The alarm panel has an event memory which stores the most recent events, (up to 255), including all alarm ev

25 current system alarms. If a zone LED or LED’s are On then this indicates system alarms that have not yet cleared. The zone LED’s 1-8 are pre-define

26 LED KEYPAD HISTORICAL EVENT DISPLAY CHART EVENT DEVICE INDICATOR STATUS ACTIVATION Zones 1-16 LED's 1-16 On Steady BYPASS Zones 1-16 BY

27 LED KEYPAD HISTORICAL EVENT DISPLAY CHART-Continued EVENT DEVICE INDICATOR STATUS RF FAILURE No RF Activity TROUBLE AUX (0) Flashing Flashing

28 PROGRAMMING SUMMARY GUIDE The program addresses available to the owner in Client Program Mode are listed below. “P” represents the <PROGRAM>

29 TELECOM NOTIFICATIONS 1-The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item compli

3

30 OWNERS DETAILS NAME: ADDRESS: TELEPHONE NUMBER: INSTALLERS

31 Other available products:

32

4 CONTENTS Page No. OPERATING YOUR ALARM 5 General Information 5 Arming the Alarm 5 Disarming the Alarm 6 Arming in Stay Mode 7 Disarming Sta

5 OPERATING YOUR ALARM GENERAL INFORMATION Your ELITE S Alarm Controller has been designed with you the user in mind. Clearly named backlit keys mea

6 On an LCD keypad the display will show “Area/s to Arm” “A B”. This indicates that both Areas A & B are selected for arming. At this point if y

7 <CODE><ENTER> On an LED keypad zone LED’s 1 & 2 will turn ON. (LED1 = Area A & LED 2 = Area B) On an LCD keypad the display will

8 Once Stay mode has been Armed, the Stay Mode exit delay will apply. When armed, if a zone is triggered the Stay Mode entry delays will also apply.

9 Zone 1 LED will turn ON. <ENTER> Bypass LED will now FLASH. While in the Bypass mode it is possible to Bypass more than one zone. The example